Loading... Please wait...


Our Newsletter

Freetronics EtherTen (Arduino Uno R3-compatible with Ethernet)

  • Freetronics EtherTen (Arduino Uno R3-compatible with Ethernet)
  • Freetronics EtherTen (Arduino Uno R3-compatible with Ethernet)
  • Freetronics EtherTen (Arduino Uno R3-compatible with Ethernet)
$59.00 (inc GST) $53.64 (exc GST)
Current Stock:

Product Description

Two tastes that taste great together: Arduino and Ethernet. But until now the only way to connect an Arduino to the Internet via a LAN was to add an Ethernet Shield. Wouldn't it be great if there was an Arduino-compatible board with on-board Ethernet? Better still, what if that board was based on the Freetronics Eleven and an Ethernet shield - but merged together into a single, integrated board that was 100% Arduino compatible and network-enabled? 

The EtherTen is a 100% Arduino compatible board that can talk to the world. Do Twitter updates automatically, serve web pages, connect to web services, display sensor data online, and control devices using a web browser. The Freetronics EtherTen uses the same ATmega328P as the Uno and the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, so it's 100% compatible with the Ethernet library and sketches. Any project you would previously have built with an Arduino and an Ethernet shield stacked together, you can now do all in a single, integrated board. Freetronics have also added  a micro SD card slot so you can store web content on the card, or log data to it.

Note that the EtherTen provides a number of options for different Power over Ethernet. You can use the supplied jumpers and feed 7-12Vdc down the wire for cheap DIY version, or you can fit our PoE Regulator 28V and feed a bit more voltage down the wire, or you can use our PoE Regulator 802.3AF along with a proper commercial PoE injector or switch. It's up to you.

All the good things about the Eleven and the Ethernet Shield have been combined into this one device so please see those pages for all the specific details, but the highlights include:

  • Gold-plated PCB.
  • Top and bottom parts overlays.
  • Top-spec ATmega328P MCU.
  • Micro-USB connector: no more shorts against shields from the USB jack!
    Please note that the Ethernet Jack can touch some wide shields, they can be raised up with Stackable Header Sets and we also have the ProtoShield Short which can sit beside it.
  • D13 pin isolated with a MOSFET so you can use it as an input.
  • Optional Power-over-Ethernet support, both cheapie DIY or full 802.3af standards-compliant.
  • Ethernet activity indicators on the PCB and the jack.
  • 10/100base-T auto-selection.
  • Fully compatible with standard Ethernet library.
  • Reset management chip.
  • Fixed SPI behavior on Ethernet chipset.
  • Robust power filtering.
  • Sexy rounded corners.



Find Similar Products by Category

Add to Wish List

Click the button below to add the Freetronics EtherTen (Arduino Uno R3-compatible with Ethernet) to your wish list.

You Recently Viewed...