Loading... Please wait...

Categories

Our Newsletter


ESP8266 WiFi board with full I/O and chip antenna

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Price:
$0.00 (inc GST) $0.00 (exc GST)
SKU:
ESP8266SMD
Availability:
Ships in 7 to 10 bus. days


Product Description

Retired - information for reference only. Click here for ESP8266 products.
 
Note - this is a 3.3V part. 5V will kill it. So don't directly connect it to your Ardiuno Uno or similar board! Get yourself a level converter instead. 
 
No doubt you read about the super-cheap WiFi module on various websites - and now it's here, in Australia - ready to ship. Unlike our other ESP8266 module, this one is all mounted on a tiny board along with a chip antenna. All the I/O pins are broken out and you can design your PCB around this, or simply nudge some inline connectors to the PCB for a quick solder job. 
 
This is a WiFi serial transceiver module, based on ESP8266 SoC. 
The SOC has Integrated TCP/IP protocol stack. To get started and for a couple of tutorials, see the "Resources" links below. 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
To make prototyping easier consider using one of our SMD adaptor boards
 
Please note that there is no "formal" structure for ESP8266-based software environments, and everything provided is by the community of users and not the creator or suppliers of ESP8266-based hardware. Due to this we cannot offer detailed support for coding and only offer a hardware warranty. 

  

More information:
  •     SDIO 2.0, SPI, UART
  •     32-pin QFN package
  •     Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
  •     Integrated RISC processor, on-chip memory and external memory interfaces
  •     Integrated MAC/baseband processors
  •     Quality of Service management
  •     I2S interface for high fidelity audio applications
  •     On-chip low-dropout linear regulators for all internal supplies
  •     Proprietary spurious-free clock generation architecture
  •     Integrated WEP, TKIP, AES, and WAPI engines

esp8266-smd-from-tronixlabs-australia.jpg

 
Specification:
  •     802.11 b/g/n
  •     Wi-Fi Direct (P2P), soft-AP
  •     Integrated TCP/IP protocol stack
  •     Integrated TR switch, balun, LNA, power amplifier and matching network
  •     Integrated PLLs, regulators, DCXO and power management units
  •     +19.5dBm output power in 802.11b mode
  •     Power down leakage current of <10uA
  •     Integrated low power 32-bit CPU could be used as application processor
  •     SDIO 1.1/2.0, SPI, UART
  •     STBC, 1×1 MIMO, 2×1 MIMO
  •     A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  •     Wake up and transmit packets in < 2ms
  •     Standby power consumption of < 1.0mW (DTIM3)
This is a WiFi serial transceiver module, based on ESP8266 SoC. The SOC has Integrated TCP/IP protocol stack. To get started and for a couple of tutorials, see the "Resources" links below.
 
Resources
 
Software:

Find Similar Products by Category


Add to Wish List

Click the button below to add the ESP8266 WiFi board with full I/O and chip antenna to your wish list.

You Recently Viewed...