Loading... Please wait...

Categories

Our Newsletter


MiFare Classic (13.56MHz RFID/NFC) Card

  • Image 1
Price:
$7.53 (inc GST) $6.85 (exc GST)
SKU:
359
Availability:
Ships in ~10 bus. days


Product Description

This is a blank MiFare Classic card - often used for train/bus passes but also found in other systems where a proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. 

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica) They are tested and work great with the Adafruit NFC/RFID Shield for Arduino

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use the Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

Technical Details:

S50 chip specification:
  • 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
  • Built in encryption engine with 48-bit key
  • 4 Byte unique identifier burned into the chip
  • 13.56 MHz frequency

Tag specification:

  • 85.5mm x 54mm x 1mm /3.36" x 2.1" x 0.03"
  • 6.3 grams / 0.2 oz
  • Works about 4" away from reader

Downloads:

NXP S50 datasheet


Find Similar Products by Category


Add to Wish List

Click the button below to add the MiFare Classic (13.56MHz RFID/NFC) Card to your wish list.

You Recently Viewed...