Loading... Please wait...


Our Newsletter

LoRa Raspberry Pi Gateway with Enclosure

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
$631.35 (inc GST) $573.95 (exc GST)
Ships in 7 to 10 bus. days

Product Description

LoRa is a fantastic advancement in the field of wireless communication. The multi-kilometer distances are incredible! Point to point LoRa ihas been nailed down with various low cost Semtec based modules like the RFM95 but the true power of an open IoT network is LoRa gateways. These provide public access accross the globe to any LoRa node as long as the node follows the guidelines (don’t use more than your share of bandwidth). But what gateway do you need?

The LoRa Raspberry Pi Gateway is a professional grade gateway with the hacker in mind. While other low cost gateways are a single channel, the LoRa Raspberry Pi Gateway comes with a fully heat-sinked concentrator capable of multi-channel, multi-node communication all running in a friendly, hackable Raspberry Pi environment.

The LoRa Raspberry Pi Gateway uses the high-power multichannel SX1301 processing engine specifically designed for LoRa gateways. If you’re just experimenting with LoRa, a single channel gateway is a fine way to go; we offer the ESP32 1-Channel LoRa Gateway based on the SX1276/78 RFM95 module. But if you’re planning on having multiple, public LoRa nodes you’ll need a proper gateway.

Designed for the US and Australia, the 915MHz LoRa gateway comes fully assembled in a black anodized aluminum enclosure using the Raspberry Pi 3 as its backbone. You’ll need to provide your own microSD card. We recommend using Resin to create your Linux image. RAK Wireless (the makers of the gateway) have a well written tutorial guiding you through the setup. The gateway includes a 2dBi 915MHz antenna and a multi-frequency GNSS(GPS) antenna. If you’d like to increase the LoRa range we have 2dBi ½ wave and 6dBi antenna upgrades available.


  • Fully assembled gateway
    • 915MHz LoRa concentrator shield
    • GPS shield
    • Raspberry Pi 3
    • Aluminum enclosure
  • Australian-certified 5.1V 2.5A power supply
  • Magnetic mount GPS/GNSS antenna 1m with SMA
  • 2dBi 915MHz LoRa compatible antenna


  • LoRa Concentrator Engine: Semtech SX1301
  • Sensitivity: -142.5 dBm
  • Output power up to 350mW or 25.5dBm
  • Range up to 15 km (Line of Sight)
  • Designed for 915MHz US/Australia LoRA ISM band
  • 2x SX1257 as Tx/Rx front-ends
  • Support 10 channels: 8 downlink, 1 uplink, 1 FSK
  • Temperature: -40 to 85 C
  • Sleek and compact anodized enclosure: 70 x 92 x 54mm
  • SMA connector for GPS/GNSS antenna
  • RP-SMA connector for 915MHz antenna




Find Similar Products by Category

Add to Wish List

Click the button below to add the LoRa Raspberry Pi Gateway with Enclosure to your wish list.

You Recently Viewed...