Loading... Please wait...

Categories

Our Newsletter


Pololu Orangutan SVP-1284 Robot Controller (assembled)

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
Price:
$139.00 (inc GST) $126.36 (exc GST)
SKU:
POL1327
Current Stock:
1


Product Description

The Pololu Orangutan SVP robot controller from Tronixlabs Australia is a complete control solution for small and medium-sized robots running at 6 – 13.5 V. The module is designed around the powerful Atmel ATmega324PA AVR microcontroller (32 KB flash, 2 KB RAM, and 1 KB EEPROM) or ATmega1284P (128 KB flash, 16 KB RAM, and 4 KB EEPROM) running at 20 MHz and features a full complement of peripheral hardware to support robotics applications: dual motor drivers capable of delivering 2 A continuous (6 peak) per channel, a demultiplexer for easy control of up to eight servos with a single hardware PWM, a removable 16×2 character LCD with backlight, a user trimmer potentiometer, a buzzer for simple sounds and music, three user pushbuttons, and two user LEDs.

The board also provides 21 free I/O lines, of which 12 can be used as analog inputs, and two switching buck (step-down) voltage regulators—one for the 5V bus and one adjustable from 2.5 V to 85% of VIN—each capable of supplying 3 A, which means there’s plenty of room and power for adding sensors, servos, and other peripherals.

 

In addition to the user-programmable ATmega324 or ATmega1284 microcontroller, the Orangutan SVP features an auxiliary PIC18F14K50 MCU that supports the main processor and serves as an integrated AVR ISP programmer, which means that no external programmer is required to use the Orangutan SVP. This auxiliary processor provides a USB connection that allows direct communication with a PC, and its firmware lets it perform several useful tasks in parallel with the main microcontroller. For example, the auxiliary processor can read two quadrature encoders, such as encoders for Pololu wheel 42×19mm or our 37D mm metal gearmotors with encoders, without burdening the main MCU, or those same four inputs could be used as additional analog inputs. The user AVR can read data from the auxiliary MCU over SPI. A USB A to mini-B cable is included with the Orangutan SVP.

The Orangutan SVP is compatible with freely available development software for Atmel’s AVR microcontrollers, including Atmel Studioand the WinAVR GCC C/C++ compiler. We provide an extensive set of software libraries that make it easy to interface with all of the integrated hardware, including the auxiliary microcontroller. Using these libraries, it takes just a few simple lines of code to write to the LCD, read button presses, drive motors, and control servos. These libraries come with a number of sample programs that demonstrate how to use the various components on the Orangutan SVP. 

Orangutan SVP fully assembled PCB with pins labeled.

 

Main Features

  • Overall unit dimensions: 3.70" × 2.20"
  • Input voltage: 6 – 13.5 V
  • Programmable 20 MHz Atmel ATmega324PA AVR microcontroller with 32 KB flash, 2 KB SRAM, and 1 KB EEPROM (SVP-324 version)
  • Programmable 20 MHz Atmel ATmega1284P AVR microcontroller with 128 KB flash, 16 KB RAM, and 4 KB EEPROM (SVP-1284 version)
  • Built-in USB AVR ISP programmer (USB A to mini-B cable included)
  • 2 bidirectional motor ports (2 A continuous per channel, 6 A maximum per channel)
  • 8-output demultiplexer tied to one of the user AVR’s hardware PWMs for easy control of up to 8 servos
  • 21 free I/O lines
    • 17 free I/O lines on the main AVR MCU, of which 8 can be analog inputs
    • 4 input lines on the auxiliary processor, which can be either 4 analog inputs or dual quadrature encoder inputs
    • 2 hardware UARTs
  • Removable 16-character × 2-line LCD with backlight
  • Primary 5V switching regulator capable of supplying 3 A
  • Secondary adjustable (2.5 V – 85% of VIN) buck (step-down) voltage regulator capable of supplying 3 A
  • Buzzer tied to one of the user AVR’s hardware PWMs
  • 3 user pushbutton switches
  • 2 user LEDs
  • Power (push-on/push-off) and reset pushbutton switches
  • Power circuit makes it easy to add extra power buttons and provides a self-shutdown option
  • Auxiliary processor (connected via SPI) provides:
    • Battery voltage reading
    • User trimmer potentiometer reading
    • Integrated USB connection
    • In-System-Programming of the main processor
    • Ability to read two quadrature encoders
  • Comprehensive user’s guide

 

Dimensions

Size: 3.70" x 2.20"
Weight: 2.7 oz

General specifications

Processor: ATmega1284P @ 20 MHz with auxiliary PIC
RAM size: 16384 bytes
Program memory size: 128 Kbytes
Motor driver: Dual TB6612FNGs
Motor channels: 2
User I/O lines: 211
Max current on a single I/O: 40 mA
Minimum operating voltage: 6 V
Maximum operating voltage: 13.5 V
Continuous output current per channel: 2 A
Peak output current per channel: 6 A
Current sense: 0.85 V/A
Maximum PWM frequency: 80 kHz
Reverse voltage protection?: Y
External programmer required?: N
LCD included?: Y

Documentation and other information

Pololu Orangutan SVP User’s Guide (Printable PDF)

User’s guide for the Pololu Orangutan SVP-324 and SVP-1284 robot controllers (both assembled and partial-kit versions).

Pololu AVR Programming Quick Start Guide (Printable PDF)

This guide explains how to get started programming your Orangutan or 3pi Robot in Windows, Linux or Mac OS X. It covers setting up an AVR development environment (Atmel Studio for Windows users), installing the Pololu AVR C/C++ Library, and setting up the Pololu USB AVR Programmer.

Pololu AVR C/C++ Library User’s Guide (Printable PDF)

Information about installing and using the C/C++ libraries provided for use with Pololu products.

Pololu AVR Library Command Reference (Printable PDF)

A reference to commands provided in the Pololu C/C++ and Arduino libraries for the AVR.

Programming Orangutans and the 3pi Robot from AVR Studio 4

Guide for programming Orangutans and the 3pi robot from the Atmel’s older AVR Studio 4 IDE. It covers installing the Pololu AVR C/C++ Library, and setting up the Pololu USB AVR Programmer.

 

File downloads

Pololu AVR Development Bundle for Windows (12MB exe)
This bundle contains all the Pololu software you need to get started programming AVRs in Windows: the Pololu AVR C/C++ Library, the Pololu USB AVR Programmer drivers and software, and the Pololu Orangutan SVP drivers. We recommend installing Atmel Studio 7.0 before installing this bundle.
Orangutan SVP Drivers for Windows (version 121115) (53k exe)
This executable installer contains the drivers you need to use the Orangutan SVP in Windows.
Orangutan SVP Reference Diagram (82k pdf)
This printable quick-reference diagram identifies all the interactive components on the Orangutan SVP, including the pins, pots, LEDs, and pushbuttons.
Orangutan SVP Schematic Diagram (99k pdf)
Sample AVR Studio 4 project for the ATmega324PA to blink an LED (7k zip)
This is a sample AVR Studio 4 project that will blink an LED on an Orangutan SVP-324.
Sample AVR Studio 4 project for the ATmega1284P to blink an LED (8k zip)
This is a sample AVR Studio 4 project that will blink an LED on an Orangutan SVP-1284.
Toshiba TB6612FNG motor driver datasheet (308k pdf)
Orangutan SVP guia de usuario (2MB pdf)
A Spanish version of the Orangutan SVP robot controller user’s guide, provided by customer Jaume B.
Orangutan SVP desktop background, 1280×768 (438k jpg)
Orangutan SVP desktop background, 1280×768, no LCD (521k jpg)

 


Find Similar Products by Category


Add to Wish List

Click the button below to add the Pololu Orangutan SVP-1284 Robot Controller (assembled) to your wish list.

You Recently Viewed...