Loading... Please wait...

Categories

Our Newsletter


Pololu Dual VNH2SP30 Motor Driver Carrier MD03A

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
RRP:
$89.95
Your Price:
$49.00 (inc GST) $81.77 $44.55 (exc GST) (You save $40.95)
SKU:
POL708
Availability:
Ships Week 1 January 2019
Current Stock:
1


Product Description

If you are looking to drive two high-power motors through one compact unit, these dual VNH2SP30 motor driver carriers are perfect for you. With these boards, it’s easy to get a medium-sized, differential drive robot running in no time. 

The Pololu dual high-power motor drivers are compact carriers for the VNH3SP30 motor driver integrated circuits from ST. The board incorporates most of the components of the typical application diagram on page 8 of the VNH2SP30 datasheet, including pull-up and current-limiting resistors and a FET for reverse battery protection. (The current sense circuit might not be populated on the VNH3SP30 version of the board since only the VNH2SP30 supports current sense.) To keep the number of I/O lines down, the two enable/diagnostic lines on each chip are tied together. All you need to add is a microcontroller or other control circuit to turn the H-Bridges on and off.

 

Dimensions

Size: 1.86″ × 1.86″

General specifications

Motor driver: VNH2SP30
Motor channels: 2
Minimum operating voltage: 5.5 V
Maximum operating voltage: 16 V
Continuous output current per channel: 14 A
Peak output current per channel: 30 A
Continuous paralleled output current: 25 A
Current sense: 0.13 V/A
Maximum PWM frequency: 20 kHz
Reverse voltage protection?: Y1

Notes:

1
There are unprotected electrolytic capacitors that will be damaged by reverse voltage.

Add to Wish List

Click the button below to add the Pololu Dual VNH2SP30 Motor Driver Carrier MD03A to your wish list.

You Recently Viewed...